A smashed window, sliding door, or shopfront is an emergency — your property is exposed, unsafe, and non-compliant. In Australia, replacement glass isn't just about matching the size. The National Construction Code (NCC) and Australian Standard AS 1288 — Glass in Buildings dictate exactly what type of glass must be used where, and getting it wrong can mean failed inspections, voided insurance, and serious injury risk.
This guide explains what to do in the first hour after glass breaks, how AS 1288 safety glass rules work, the difference between toughened and laminated glass, when you legally need a licensed glazier, and how to avoid being caught out by a cheap non-compliant replacement.
First 60 Minutes: What to Do After Glass Breaks
- Make the area safe — Keep children and pets away. Wear enclosed shoes and gloves. Do not attempt to remove large shards from the frame — leave it for the glazier.
- Secure the opening — If the glazier cannot attend immediately, cover the opening with plywood or heavy cardboard taped to the frame. For shopfronts and ground-floor windows, a 24/7 emergency glazier will board up and make safe — usually within 1–2 hours in metro areas.
- Photograph the damage — Wide and close-up shots of the broken pane, frame, and any injury or property damage. You'll need these for insurance.
- Call your insurer — Many home and business policies cover emergency make-safe and replacement. Get a claim number and ask if they have preferred glaziers — but you are generally entitled to choose your own.
- Call a licensed, insured glazier — Ask for an emergency response time, whether they carry safety glass stock, and that the replacement will comply with AS 1288 — get this in writing on the quote.
🕒 Emergency glazier tip: A true 24/7 glazier answers the phone at 2am, quotes a call-out + make-safe + re-measure, and returns to fit the compliant glass once ordered. If they offer to "fit any glass tomorrow" without mentioning safety glass or AS 1288, choose another provider.
Why AS 1288 Matters: Not All Glass Is Legal Everywhere
AS 1288 — Glass in Buildings: Selection and Installation is the Australian Standard that determines what grade and type of glass must be used in each location in a building. It is called up by the National Construction Code (NCC) — meaning compliance with AS 1288 is mandatory for all new work, replacements, and renovations, not optional guidance.
The standard exists because ordinary annealed (float) glass breaks into large, sharp shards that cause severe lacerations. Safety glass is designed to either shatter into small granules (toughened) or stay bonded together when broken (laminated).
Your glazier is responsible for selecting glass that complies with AS 1288 for the specific location, wind load, and frame. As the property owner, you are responsible for ensuring the person you engage does so — a non-compliant pane installed today can fail a building inspection, strata audit, or insurance assessment tomorrow.
Read the NCC and AS 1288 overview via the Australian Building Codes Board — ncc.abcb.gov.au and Standards Australia — standards.org.au.
Where Safety Glass Is Mandatory (AS 1288 Overview)
Every pane in a domestic or commercial building must be assessed, but AS 1288 mandates safety glass (Grade A) in all human impact locations — broadly, where a person could walk into, fall against, or slip into glass:
| Location | Requirement | Typical Glass |
|---|---|---|
| Doors and side panels within 300mm of a door | Grade A safety glass | 5mm toughened or 6.38mm laminated |
| Full-height windows / panels where sill is <500mm above floor | Grade A safety glass | Toughened or laminated |
| Bathrooms — shower screens, bath enclosures, windows near baths | Grade A safety glass | Toughened (shower), laminated where required |
| Balustrades, pool fences, glass balconies | Grade A safety glass, with specific thickness + interlink requirements | Toughened laminated (often 12mm+) |
| Shopfronts, sliding doors, low windows in commercial | Grade A safety glass + manifestation at eye level if frameless | Toughened or laminated |
| Overhead / skylights, sloped glazing | Laminated safety glass (must not fall if broken) | Laminated / laminated toughened |
| High windows (>5m above ground) or wind-load areas | Calculated to AS 1288 for wind pressure + human impact | Engineered thickness / type |
This is a summary — the full determination depends on pane size, height above floor, distance from doors, wind region, and frame type. Your glazier must calculate it per AS 1288 for each pane.
Toughened vs Laminated: What's the Difference?
- Toughened (tempered) glass — Heat-treated to be ~4× stronger than float glass. When broken, it shatters into small, blunt granules rather than shards. Used for doors, low windows, shower screens, and tabletops. Cannot be cut or drilled after toughening — it must be measured and ordered to size.
- Laminated glass — Two or more layers bonded with a PVB interlayer. When broken, shards stick to the interlayer — the pane cracks but stays in place. Used for overhead glazing, balustrades, shopfronts, and security applications. Can also provide acoustic and UV benefits.
- Toughened laminated — Combines both: toughened panes laminated together. The highest safety and security grade — used for pool fences, balconies, and high-risk shopfronts.
- Double glazed (IGU) — Two panes with a sealed air gap for thermal performance. Each pane must individually comply with AS 1288 for its location — an IGU does not automatically mean safety glass.
🏠 Heritage and strata note: If your building has single-glazed annealed glass in a location that now requires safety glass under the current NCC, any replacement pane must be upgraded to compliant safety glass — "like for like" annealed is not compliant. Strata managers and heritage officers can advise on approved profiles that preserve appearance while meeting the standard.
Do You Need a Licensed Glazier?
Glazing is regulated differently from electrical and plumbing:
- No standalone "glazier licence" in most states — but glazing work above prescribed values falls under building contractor licensing. In NSW, glazing over $5,000 requires a contractor licence via NSW Fair Trading; in QLD, glass & glazing work requires a QBCC licence; in VIC, domestic glazing is covered by VBA registration for the relevant building class; in WA/SA/TAS/ACT/NT, general builder or trade contractor licensing applies.
- Public liability insurance is essential — glass handling, cutting, and installation carries high property-damage and injury risk. Ask for a Certificate of Currency ($10–20M).
- Industry accreditation matters — Look for membership with the Australian Glass & Window Association (AGWA) — agwa.com.au and compliance with AS 1288, AS 2208 (safety glazing materials), and NCC glazing provisions.
Even where a specific glazier licence is not mandated, engaging an uninsured, unaccredited operator who installs non-compliant glass leaves you liable for rectification — and may void body corporate or landlord insurance.
What a Compliant Quote and Job Should Include
- Pane-by-pane assessment against AS 1288 — location, dimensions, wind load, and required grade/thickness stated on the quote
- Glass type specification (e.g., "6.38mm clear laminated Grade A to AS 2208 / AS 1288")
- Safety glass compliance marking on the pane (etched mark visible in the corner of toughened/laminated panes)
- Disposal of broken glass and clean-up included
- Warranty on materials and installation (typically 7–10 years on IGUs, 1–5 years on workmanship)
- Tax invoice with ABN, licence/registration number where applicable, and insurance details
How to Check Before You Book
- Ask for their contractor / builder licence or registration number (if applicable in your state) and ABN
- Verify it on your state's public register (Fair Trading / QBCC / VBA / Building & Energy WA)
- Ask for proof of public liability insurance and confirm the replacement will be certified to AS 1288
- Check reviews on Google and ServiceTradie.com.au — consistent emergency response reviews are a strong signal for glaziers
- Confirm the quote specifies Grade A safety glass where required — not just "new glass to match"
Need an emergency glazier now?
Search ServiceTradie.com.au for 24/7 glaziers near you — verified insurance, AS 1288 compliant glass, and genuine customer reviews.
Find a GlazierCost Guide: What Emergency Glass Replacement Costs in Australia (2026)
- Emergency make-safe / board-up — $180–$450 (after-hours call-out + boarding)
- Single pane annealed replacement (where allowed) — $250–$600 per pane + installation
- Toughened or laminated safety glass pane — $450–$1,200+ per pane depending on size, thickness, and whether templated
- Double-glazed IGU replacement — $600–$1,800 per unit; lead time 7–14 days as IGUs are factory-made
- Shopfront / large commercial pane — $1,500–$6,000+ depending on size, crane access, and interlayer requirements
Prices vary by glass type, regional availability, access, and after-hours rates. A compliant quote should itemise make-safe, glass, and installation separately.
Key Takeaway
A broken window is not just an inconvenience — it's a compliance event. Replacing it with the wrong glass leaves your property unsafe, uninsurable, and non-compliant with the NCC. Insisting on a glazier who quotes to AS 1288, supplies Grade A safety glass where required, and warrants the work is the simplest way to protect your home, your tenants, and your insurance.
This article is general information only and does not constitute legal, building, or compliance advice. Glass selection depends on pane size, location, wind region, and frame per AS 1288 and the NCC. Always obtain an AS 1288 assessment from a qualified glazier and verify licensing and insurance with your state regulator.