Australia leads the world in rooftop solar — more than 3.7 million homes now have panels — but not every installer is qualified to claim government rebates or wire your battery safely. If your installer isn't properly licensed and accredited, you risk losing thousands in Small-scale Technology Certificates (STCs), voiding warranties and insurance, and — with batteries — creating a serious fire hazard.
This guide explains how solar and battery accreditation works in Australia, the difference between an electrical licence and CEC / Solar Accreditation Australia accreditation, how installers become accredited, and how homeowners can verify an installer before signing a quote.
Why Accreditation Matters: Licence vs Accreditation
Two separate authorisations are required for a compliant solar or battery installation:
| Requirement | What It Covers | Issued By |
|---|---|---|
| Electrical Licence (A Grade) + Contractor Licence | Legal right to perform prescribed electrical work — wiring, switchboard, grid connection | State electrical regulators (Energy Safe Victoria, NSW Fair Trading, ESO QLD, etc.) |
| Solar / Battery Accreditation | Proves the installer is competent to design and install solar & batteries to AS/NZS 5033, AS 4777, and CER requirements — and is authorised to create STCs | Solar Accreditation Australia (SAA) — formerly Clean Energy Council (CEC) |
| Electrical Contractor + Retailer Authorisation | Business-level authorisation to contract solar work and offer STC assignment | State contractor licensing + REC Registry / CER |
In short: a licensed electrician without solar accreditation can wire your house, but cannot legally create STCs or certify a solar system for rebate purposes. You need both.
💰 STCs at stake: On a typical 6.6kW system, STCs are worth $2,500–$4,000 depending on zone and STC price. Only an installation performed and supervised by an accredited person can create valid STCs. Use an unaccredited installer and you forfeit the entire rebate.
How Solar Accreditation Works in Australia (2026)
Until early 2024, the Clean Energy Council (CEC) administered solar accreditation. Accreditation has since transitioned to Solar Accreditation Australia (SAA) — the new independent scheme operator appointed under the Small-scale Renewable Energy Scheme (SRES). References to "CEC accreditation" and "SAA accreditation" mean the same scheme — SAA is the current operator. Verify the transition status at solaraccreditation.com.au and the Clean Energy Regulator — cleanenergyregulator.gov.au.
The main accreditation classes are:
- Grid-Connect (GC) Solar — Design & Install — rooftop solar connected to the grid; the most common class
- Grid-Connect Battery Storage — Design & Install — solar batteries (Tesla Powerwall, Enphase, BYD, etc.) — often held as an add-on to GC Solar
- Off-Grid (Stand-Alone) Solar & Batteries — for remote and off-grid systems
- Solar Design Only — for designers who do not perform the physical installation (the installer must still be accredited)
Each class has separate Design and Install streams — a person may hold Design only, Install only, or both. For a standard residential job, the supervising installer must hold Install accreditation for the system type being installed, and the design must be by an accredited designer.
How to Become an Accredited Solar & Battery Installer
Prerequisites
- Hold a current unrestricted electrical licence (A Grade) — this is non-negotiable
- Hold or obtain the relevant electrical contractor licence for the business
Step 1: Complete the Accreditation Training
Enrol with a SAA-approved training provider (TAFEs and private RTOs nationally). Core units for Grid-Connect Solar & Battery typically include:
- UEERE0054 — Design grid-connected PV systems (and/or UEERE0061 for battery storage)
- UEERE0080 — Install photovoltaic systems (and/or UEERE0077/UEERE0078 for battery storage)
- Working safely at heights, AS/NZS 5033 (PV installation), AS 4777 (grid connection), and CER compliance
Duration is typically 5–10 days intensive plus pre-study and assessment, assuming you already hold an electrical licence. Full new-entrant pathways including the electrical licence are ~4 years via apprenticeship + accreditation units.
Step 2: Apply for Accreditation
- Create an account at solaraccreditation.com.au
- Upload proof of electrical licence, training Statements of Attainment, ID, and insurance
- Pay the application and annual fee (indicative 2026: $600–$1,000 application + ~$500–$800 annual, depending on classes held — check SAA's current fee schedule)
- SAA assesses the application, verifies training, and issues accreditation with an accreditation number and expiry date
- Maintain CPD — SAA requires ongoing professional development and refresher training to renew each year
Once accredited, you appear on the public accredited installer register at solaraccreditation.com.au, and your business can be listed as an Approved Solar Retailer through the Clean Energy Council — cleanenergycouncil.org.au retailer program.
Why Homeowners Must Use an Accredited Installer
- Rebate eligibility — Only systems designed and installed by an SAA-accredited person can create STCs under the SRES. Without valid STCs, you pay full price — typically $3,000–$5,000 more.
- State rebates and feed-in tariffs — VIC Solar Homes, NSW rebates, SA/QLD battery schemes, and all DNSP feed-in tariff approvals require SAA accreditation. Unaccredited work is automatically ineligible.
- Safety — Solar DC voltages (up to 1000V) and battery thermal runaway are lethal if wired incorrectly. AS 5033 / AS 4777 compliance and CER audit data show defect rates are sharply higher for unaccredited installations.
- Warranty & insurance — Panel, inverter, and battery warranties (often 10–25 years) require accredited installation. Insurers can deny fire or electrical damage claims arising from non-compliant solar work.
- Network approval — Your electricity distributor (AusNet, Endeavour, Energex, SA Power Networks, Western Power, etc.) will not approve grid connection without the accredited installer's compliance paperwork.
- Property value — Accredited systems come with a compliance certificate and are recorded on the CER registry — essential when selling or refinancing.
⚠️ Common scam: Door-to-door or telemarketed "free solar" offers from companies that are not SAA-accredited or use unaccredited subcontractors. The quote may look cheap because it omits compliant components, valid STCs, or proper after-sales support — all of which cost you later.
How to Verify an Installer in 30 Seconds
- Ask for their SAA accreditation number and the name on the accreditation, plus their electrical licence number
- Search both at solaraccreditation.com.au — Find an Accredited Installer and your state's electrical licence register (see our Electrical Licence Guide for state links)
- Confirm the accreditation is current and classes cover your job (e.g., Grid-Connect + Battery Storage if you're adding a battery)
- Ask whether the business is a CEC Approved Solar Retailer — search at cleanenergycouncil.org.au/approved-retailers for additional consumer protections (warranty handling, dispute resolution)
- Ensure the quote itemises the STC assignment amount, compliance certificate, and grid connection application — not just "supply and install"
For Tradies: Adding Solar & Battery to Your Services
For licensed electricians, air conditioning techs with electrical endorsements, and electrical contractors, solar and battery is the fastest-growing field service in Australia — driven by energy prices, rebates, and the electrification trend. Adding SAA accreditation opens:
- Higher-margin jobs ($15,000–$25,000 for a solar + battery install vs $3,000 for a split system)
- Recurring work — battery additions, system expansions, and maintenance
- Government scheme work — Solar Homes, battery rebates, and virtual power plant (VPP) programs all require accredited installers
- Cross-sell with air conditioning and hot water heat pumps — the same customers electrifying their homes
The training investment is modest if you already hold an electrical licence — often under $2,000 and 1–2 weeks for the Grid-Connect units. List your expanded services on ServiceTradie.com.au once accredited to capture solar-intent searches in your service area.
Looking for an accredited solar & battery installer?
Find SAA-accredited, licensed electricians near you on ServiceTradie.com.au — verified accreditation, reviews, and compliance certificates included.
Find a Solar InstallerOfficial Resources to Verify Requirements
- Solar Accreditation Australia (SAA) — solaraccreditation.com.au — accreditation classes, training providers, public register, current fees
- Clean Energy Regulator (CER) — cleanenergyregulator.gov.au — SRES, STCs, REC Registry
- Clean Energy Council — Approved Retailers — cleanenergycouncil.org.au/approved-retailers
- Standards — AS/NZS 5033, AS 4777, AS/NZS 3000 via standards.org.au
- State electrical regulators — See our Electrical Licence Guide for direct links by state
This article is general information only and does not constitute legal, licensing, or financial advice. Accreditation requirements, STC values, rebate schemes, and electrical licensing rules vary by state and change periodically. Always verify current requirements with Solar Accreditation Australia, the Clean Energy Regulator, and your state electrical safety regulator.